{"id":3743,"date":"2026-11-10T11:37:46","date_gmt":"2026-11-10T03:37:46","guid":{"rendered":"http:\/\/www.anilaoiloilo.com\/blog\/?p=3743"},"modified":"2026-11-10T11:37:46","modified_gmt":"2026-11-10T03:37:46","slug":"how-to-make-resin-ornaments-with-a-resin-laminating-resin-4d4b-a999f3","status":"publish","type":"post","link":"http:\/\/www.anilaoiloilo.com\/blog\/2026\/11\/10\/how-to-make-resin-ornaments-with-a-resin-laminating-resin-4d4b-a999f3\/","title":{"rendered":"How to make resin ornaments with a resin laminating resin?"},"content":{"rendered":"<p>If you\u2019ve ever walked through a holiday market or scrolled through a small business shop online, you\u2019ve probably spotted resin ornaments\u2014their smooth, glossy surfaces catch the light, tiny embedded details (dried wildflowers, mini star shapes, even micro photochromic bits) pop against clear or soft-tinted resin, and they feel far more intentional than mass-produced plastic decor. As someone who\u2019s run a resin ornament supply business for 8 years, I get asked all the time how makers turn liquid resin into the kind of durable, detailed pieces people want to keep for years (and resell profitably too). The secret most new makers overlook? Using a proper laminating resin, not just a random casting resin. I\u2019m going to break down the process step by step, share the mistakes I see beginners make every single time, and explain why our go-to laminating resin is non-negotiable for consistent, high-quality ornaments. <a href=\"https:\/\/www.shengtengjewelry.com\/resin-ornament\/\">Resin Ornament<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.shengtengjewelry.com\/uploads\/47883\/small\/resin-fruit-charms7b9b7.jpg\"><\/p>\n<p>First, let\u2019s get clear on what laminating resin is, and why it\u2019s different from the resin you\u2019d use to make a thick, standalone paperweight. Laminating resin is formulated to be thin, self-leveling, and low in air bubbles\u2014perfect for coating, sealing, and embedding small details for thin, lightweight ornaments that hang well on trees, wreaths, or desks. Casting resin, on the other hand, is thicker, cures harder, and is meant for deep pours (think 2+ inches of resin for a coaster). If you use casting resin for ornaments, you\u2019ll end up with a too-heavy piece that doesn\u2019t hang right, or a surface so thick it traps tiny bubbles that never rise to the top. Our supply\u2019s top-selling laminating resin is specifically designed for ornaments: it cures to a flexible (not brittle) finish, resists yellowing after months of sun exposure, and adheres well to all the surfaces makers use as bases\u2014wood slices, glass blanks, metal tags, even thin ceramic tiles.<\/p>\n<p>Now, let\u2019s walk through the process, from prep to finished ornament, with the tips I\u2019ve learned from working with 100+ makers over the years. Skip these steps and you\u2019ll end up with warped ornaments, or details that peel off mid-season.<\/p>\n<p>Start with prep: this is 70% of the work, and the step where most beginners cut corners. First, gather your materials: your laminating resin (our supply offers two types\u20141:1 ratio for small batches and 2:1 ratio for larger production runs, both formulated for low VOCs so fumes don\u2019t make your hands or lungs irritated), a mixing cup (disposable plastic cups work, but for repeat use, we suggest silicone mixing cups that release resin easily), stir sticks, a release agent (we sell a food-safe one perfect for ornaments, but you can also use a thin coat of beeswax for a non-toxic option), your ornament base (wood slices, glass rounds, metal hang tags\u2014we have a curated selection of blank bases if you don\u2019t want to source them yourself), any inclusions you want to embed (dried pressed flowers, mini glitter, resin chips, tiny resin numbers for year-specific ornaments), a level (for large batches), and a heat gun or small torch (for popping bubbles).<\/p>\n<p>Before you even open your resin, prep your work space. Laminating resin cures in 24 hours, so you don\u2019t want dust, pet hair, or kid toys ruining your pieces. I always clear a table, cover it with a plastic drop cloth, and turn on a small fan in the corner (but not a fan that blows directly on your resin\u2014too fast of air will cause uneven curing and ripples). If you\u2019re working outside, pick a calm day with no wind, or you\u2019ll get dirt in your uncured resin.<\/p>\n<p>Next, prep your bases. This is the step no one talks about, but it\u2019s why our ornaments hold their inclusions so well. If you\u2019re using wood slices, sand the back and front with 220-grit sandpaper first, then wipe them down with a lint-free cloth to remove all sawdust. Sawdust is resin\u2019s enemy\u2014it will sit between the wood and resin, causing bubbles and peeling. For glass or metal blanks, wipe them with isopropyl alcohol to remove any grease or leftover sticker residue. Grease is another big one\u2014even a tiny smudge from touching a metal tag with your bare hands will make the resin slide off instead of adhering. Finally, if you\u2019re embedding inclusions, arrange them on your base first. Don\u2019t drop them into wet resin\u2014you\u2019ll end up with them floating to the surface or sinking to the bottom, and you\u2019ll have to fish them out mid-cure.<\/p>\n<p>Now, mixing the resin. This is where people mess up the most, leading to sticky, soft, or yellowed ornaments. First, read the ratio on your resin label\u2014our laminating resin is 1:1, meaning equal parts Part A and Part B. Do not eyeball this! Even a 10% extra of Part A will make your resin cure too slow, or stay sticky for days. Pour both parts into your mixing cup, and stir slowly for 2 minutes total. Don\u2019t whip the mixture\u2014whipping creates thousands of tiny bubbles that will get trapped in your ornaments, and they\u2019ll never rise to the top. Scrape the sides and bottom of the cup once while stirring, to make sure all of Part B (the hardener) is mixed in\u2014if you leave a blob of hardener at the bottom, your ornament will be soft there, and will crumble.<\/p>\n<p>After mixing, let the resin rest for 1-2 minutes. This is called \u201cdegassing,\u201d and it lets the tiny bubbles that formed while stirring rise to the top. If you skip this, you\u2019ll have bubbles in your finished ornament, which look amateur and will get worse as time goes on. For large batches, you can also use a pressure pot, but for small home batches, just letting it sit works.<\/p>\n<p>Now, pour and add inclusions. Take your prepped base, place it on your level, and pour a thin, even coat of resin over the front (or back, if you want a double-sided ornament) \u2014 about 1\/16 of an inch thick is perfect for ornaments, thin enough to hang well, thick enough to be durable. If you\u2019re adding embedded inclusions like dried wildflowers, place them gently into the wet resin with tweezers, press them down just a little so they don\u2019t float. For glitter, add it to the resin after you\u2019ve poured the first thin coat, then pour a very thin second coat on top to seal it in\u2014if you put glitter directly on the first coat without sealing, it will scratch off over time.<\/p>\n<p>Once you\u2019ve poured and placed your inclusions, it\u2019s time to pop the bubbles. Take your heat gun (set to low, not high\u2014high heat will cause the resin to bubble more, or even burn) and hold it 6-8 inches away from the surface. Move it slowly back and forth over the resin\u2014each bubble will pop within a few seconds. If you don\u2019t have a heat gun, you can use a small torch (for cooking) set to a very low flame, or even a thin straw to blow on the surface. Do this quickly\u2014you only have 5-10 minutes before the resin starts to gel, and bubbles will get stuck in it after that.<\/p>\n<p>Now, the curing step. Leave your ornaments to cure undisturbed in a dust-free space for 24 hours. Do not touch them, move them, or put hooks on them until the full 24 hours are up. If you add a hook too soon, it will pull the resin away from the base, and your ornament will break. After 24 hours, you can add your hanging hook (we have a range of small hooks perfect for ornaments, from gold metal to clear plastic) and then let them cure for another 24 hours to get the full hardness.<\/p>\n<p>Wait a second\u2014what about if you want to make thicker ornaments, or have a base that needs a deeper seal? That\u2019s where laminating resin really shines, but I still see people make mistakes. If you want a double-sided ornament (with inclusions on both sides), you can pour a thin coat on the first side, let it cure for 2 hours, then flip it over and pour a coat on the other side. Don\u2019t pour a full thick layer at once\u2014laminating resin is thin, so a thick pour will take too long to cure, and will bubble. Another pro tip: if you\u2019re making ornaments for outdoor use (wreaths, porch decor), add a thin second coat of laminating resin 2 hours after the first pour. This creates a protective seal that resists rain and UV rays, so your ornaments won\u2019t fade or get sticky in the sun.<\/p>\n<p>Now, let\u2019s talk about the mistakes that will ruin your ornaments, even if you follow the steps. First, using casting resin instead of laminating. I saw a maker last year use casting resin to make 50 holiday ornaments\u2014they ended up too heavy, so half broke off the hooks on the first day of hanging. Casting resin is 3x thicker than laminating, so it\u2019s not designed for thin, lightweight pieces. Second, not degassing your resin. One of my most popular ornaments is a clear resin circle with pressed baby\u2019s breath inside\u2014if you don\u2019t degas, you\u2019ll get 10 tiny bubbles scattered through it, which makes the baby\u2019s breath look cloudy instead of delicate. Third, cutting corners on prep. I had a beginner maker send me 20 ornaments last month, all with wood bases that had sawdust left on them\u2014within a week, the resin peeled off all of them, because the sawdust created a barrier. Fourth, mixing too much resin at once. Laminating resin has a working time of about 10 minutes for small batches, 5 for large batches. If you mix more than you can pour in that time, it will start to gel in the cup, and you\u2019ll end up with lumpy resin in your ornament.<\/p>\n<p>Now, why our supply\u2019s laminating resin is the right choice for you. We\u2019ve been testing resins for ornament makers since 2015, and most resins on the market either cure too brittle (they break if you drop an ornament) or too yellow (after 6 months, a white ornament turns a sickly cream). Our laminating resin cures to a flexible, shatter-resistant finish, and is formulated with UV inhibitors so it stays clear for up to 3 years outdoors. We also offer pre-mixed color tints if you don\u2019t want to use clear resin\u2014soft pastels for spring ornaments, rich metallics for holiday pieces, even matte tints that are perfect for minimalist designs.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.shengtengjewelry.com\/uploads\/47883\/small\/resin-snowflake-ornaments02fce.jpg\"><\/p>\n<p>Whether you\u2019re a hobbyist making ornaments for your family, or a small business looking to add resin pieces to your line, using the right laminating resin is the difference between a one-off craft and a high-quality product people will pay for. The process is simple, but the small details (prep, mixing, degassing) make all the difference. Our team has helped over 200 makers refine their resin ornament process, from first-time users to wholesale retailers, so we know exactly what works for consistent, beautiful results.<\/p>\n<p><a href=\"https:\/\/www.shengtengjewelry.com\/resin-fridge-magnet\/\">Resin Fridge Magnet<\/a> If you\u2019re ready to stock the right laminating resin for your projects, or have questions about bases, inclusions, or batch quantities, reach out to our team to discuss your needs. We can help you find the right resin ratio for your production size, offer custom tint options, and share pro tips to cut down on mistakes and waste.<\/p>\n<h2>References<\/h2>\n<ol>\n<li>&quot;Resin Crafting Safety and Best Practices&quot; &#8211; American Craft Council, 2022<\/li>\n<li>&quot;Laminating vs. Casting Resins: Key Differences for DIY Projects&quot; &#8211; Resin Obsession, 2021<\/li>\n<li>&quot;UV Resistance in Resin Ornaments: Long-Term Durability Testing&quot; &#8211; Journal of Craft Materials Science, 2023<\/li>\n<li>&quot;Prep Techniques for Adhesion in Resin-Base Projects&quot; &#8211; DIY Craft Industry Association, 2020<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.shengtengjewelry.com\/\">Shengzhou Shengteng Accessories Co., Ltd.<\/a><br \/>With abundant experience, we are one of the most professional resin ornament manufacturers and suppliers in China. We warmly welcome you to wholesale customized resin ornament at competitive price from our factory. For free sample, contact us now.<br \/>Address: Room 701, Building 23, Wanyang Innovation City, No. 368 Kaiya Road, Changle Town, Shengzhou City, Shaoxing City, Zhejiang Province<br \/>E-mail: 15869252296@163.com<br \/>WebSite: <a href=\"https:\/\/www.shengtengjewelry.com\/\">https:\/\/www.shengtengjewelry.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever walked through a holiday market or scrolled through a small business shop online, &hellip; <a title=\"How to make resin ornaments with a resin laminating resin?\" class=\"hm-read-more\" href=\"http:\/\/www.anilaoiloilo.com\/blog\/2026\/11\/10\/how-to-make-resin-ornaments-with-a-resin-laminating-resin-4d4b-a999f3\/\"><span class=\"screen-reader-text\">How to make resin ornaments with a resin laminating resin?<\/span>Read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":3743,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3706],"class_list":["post-3743","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-resin-ornament-4ee9-a9d006"],"_links":{"self":[{"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/posts\/3743","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/comments?post=3743"}],"version-history":[{"count":0,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/posts\/3743\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/posts\/3743"}],"wp:attachment":[{"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/media?parent=3743"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/categories?post=3743"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/tags?post=3743"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}