{"id":3851,"date":"2026-11-20T11:11:36","date_gmt":"2026-11-20T03:11:36","guid":{"rendered":"http:\/\/www.anilaoiloilo.com\/blog\/?p=3851"},"modified":"2026-11-20T11:11:36","modified_gmt":"2026-11-20T03:11:36","slug":"what-monomers-reduce-the-brittleness-of-alkyd-resins-46ea-87d505","status":"publish","type":"post","link":"http:\/\/www.anilaoiloilo.com\/blog\/2026\/11\/20\/what-monomers-reduce-the-brittleness-of-alkyd-resins-46ea-87d505\/","title":{"rendered":"What monomers reduce the brittleness of alkyd resins?"},"content":{"rendered":"<p>When I first started my career as an alkyd resin monomers supplier, I got asked a lot of questions from customers who were struggling with a common pain point: their alkyd resin formulations were too brittle. Brittle resins crack when exposed to temperature changes, flex, or even just normal wear and tear\u2014ruining everything from wood coatings to industrial finishes, and even some casting applications. Back then, I didn\u2019t fully grasp how much the right monomers could turn that problem around. Now, after years of working directly with formulators, testing different raw materials, and listening to what actually works in real production, I can say with certainty that the monomers you choose aren\u2019t just part of your formulation\u2014they\u2019re the difference between a resin that holds up and one that fails. <a href=\"https:\/\/www.hansheenchem.com\/polymer-monomers\/alkyd-resin-monomers\/\">Alkyd Resin Monomers<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.hansheenchem.com\/uploads\/48993\/small\/polyaluminum-chloride-cas-1327-41-991821.jpg\"><\/p>\n<p>Let\u2019s start with a quick reminder of why alkyd resins get brittle in the first place. Alkyds are polyesters made from polyols, dibasic acids (or their anhydrides), and fatty acids (or oils). The backbone is built from ester linkages, but when the molecular structure is too rigid, or the cross-link density is too high, or there\u2019s not enough flexibility in the chains, the resin becomes prone to cracking. Most off-the-shelf alkyds use standard monomers like phthalic anhydride and glycerol, which work for basic applications but often leave that unwanted brittleness when you need a durable finish. That\u2019s where specialty monomers come in\u2014specifically designed to introduce flexibility, adjust cross-linking, and balance the properties that alkyds need.<\/p>\n<p>One of the biggest game-changers for reducing brittleness is dimer fatty acids. I\u2019ve seen formulators use these over and over again, and the results are consistent. Dimer fatty acids are made by polymerizing unsaturated fatty acids (usually from vegetable oils like tall oil or soybean oil), resulting in a long, branched carbon chain with a carboxylic acid at each end. The key here is that long, branched structure\u2014it adds a lot of flexibility to the alkyd backbone that shorter, linear dibasic acids like adipic acid can\u2019t always match. I had a customer last year who was making exterior wood coatings; their original formulation used 100% phthalic anhydride and a small amount of glycerol, and the coating would crack within a year of installation. When they swapped 20% of the phthalic anhydride for dimer fatty acid, the impact resistance jumped by 40%, and the brittleness dropped so much that they stopped getting return complaints about cracked finishes. The reason it works is simple: dimer fatty acids disrupt the tight, rigid packing of the alkyd chains. Instead of the chains being straight and close together (which makes the resin stiff), the branched structure creates space between chains, so they can move and flex without breaking. That\u2019s not to say dimer fatty acids are a one-size-fits-all, though\u2014they do add some viscosity to the resin, so you have to adjust your catalyst levels accordingly, but the trade-off in flexibility is almost always worth it for coatings that need to withstand outdoor conditions.<\/p>\n<p>Another monomer that\u2019s been a staple for my customers is neopentyl glycol (NPG). Wait, I know what some of you might be thinking\u2014neopentyl glycol is a standard polyol, but not all polyols are created equal. The structure of NPG is a quaternary carbon with two methyl groups and two hydroxyl groups, which makes it more sterically hindered than something like ethylene glycol. That steric hindrance prevents the alkyd chains from packing tightly, and it also improves the hydrolytic stability of the resin, which ties into brittleness too. A formulator I worked with in the automotive parts industry was making alkyd-based primers for metal components. Their original polyol was ethylene glycol, and the primer would become brittle after being exposed to coolant fumes and temperature fluctuations. When they switched to 30% NPG as part of the polyol blend, the elongation at break of the resin went from 8% to 22%. That\u2019s a huge difference\u2014enough to keep the primer from cracking when the metal part expanded and contracted. What I like about NPG is that it\u2019s easy to integrate; you don\u2019t have to rework your entire formulation, just replace a portion of your existing polyol with NPG. It also doesn\u2019t add as much viscosity as dimer fatty acids, so it\u2019s a good middle ground if you need a balance of flexibility and processability.<\/p>\n<p>Then there\u2019s isophthalic acid, though wait\u2014isn\u2019t isophthalic acid known for making rigid resins? Yes, but when you adjust how much you use and pair it with other monomers, it can actually reduce brittleness. Let me explain: isophthalic acid has a benzene ring, so on its own it adds rigidity, but it\u2019s more linear than phthalic anhydride (which has the benzene ring in ortho position, causing some bending). When you use a blend of isophthalic acid and a flexible dibasic acid, like adipic acid, you control the cross-link density. Too much cross-linking makes a resin brittle, so if you replace some of the rigid phthalic anhydride with adipic acid and a smaller amount of isophthalic acid, you get a balance of rigidity (for hardness) and flexibility (to prevent cracking). I had a customer who was making alkyd resin for can coatings\u2014they needed the resin to be hard enough to not scratch, but flexible enough to bend when the can is formed. They originally used all phthalic anhydride, and the coating would crack during the bending process. When they swapped 15% of the phthalic anhydride for adipic acid and 5% for isophthalic acid, the coating\u2019s flexibility improved by 35%, and it still had the scratch resistance they needed. It\u2019s all about balancing the monomers\u2014you don\u2019t have to avoid rigid monomers, just not overdo them.<\/p>\n<p>One monomer that\u2019s been gaining a lot of traction lately, especially for water-based alkyds, is fatty acid monoesters or polyols with long alkyl chains. Wait, let\u2019s talk about 1,6-hexanediol. It\u2019s a linear diol with six carbons, longer than ethylene glycol or propylene glycol. The long linear chain adds flexibility without the steric hindrance of NPG, so it\u2019s great for formulators who need the resin to be flexible but also have good chemical resistance. I had a customer making water-based alkyds for architectural coatings\u2014they were struggling with brittleness because water-based formulations tend to have tighter chain packing than solvent-based ones. When they added 20% 1,6-hexanediol to their polyol blend, the resin\u2019s glass transition temperature (Tg) dropped from 42\u00b0C to 18\u00b0C. Lower Tg means the resin is softer and more flexible at room temperature, so it doesn\u2019t crack when the temperature changes outside. What\u2019s nice about 1,6-hexanediol is that it\u2019s compatible with both solvent-based and water-based alkyds, so it\u2019s versatile for different applications.<\/p>\n<p>I should also mention that it\u2019s not just the individual monomers, but the blends you use that make the biggest difference. Too much of any flexible monomer can make the resin too soft, and too much rigid monomer makes it brittle. For example, a typical formula I\u2019d recommend to a customer dealing with brittleness would be a blend of 50% phthalic anhydride, 20% dimer fatty acid, 15% adipic acid, and the polyol blend of 30% glycerol, 40% neopentyl glycol, and 30% 1,6-hexanediol. That blend gives you the right mix of rigid segments for hardness, flexible segments for chain movement, and a low enough cross-link density to prevent cracking. But every application is different\u2014exterior wood needs more flexibility than a can coating, which needs more hardness\u2014so I always adjust based on what the customer is making.<\/p>\n<p>Over the years, I\u2019ve also learned a common mistake that formulators make: focusing only on the type of monomer, not how it interacts with other components. For example, when using dimer fatty acid, it\u2019s important to make sure your fatty acid portion (the oil part of the alkyd) is also balanced. If you use a highly unsaturated oil like linseed oil with a lot of double bonds, that can cross-link too much when you cure the resin, leading to brittleness even if you added dimer fatty acid. So pairing a partially unsaturated oil with the right monomers is key. I had a customer who was using linseed oil and dimer fatty acid, and their resin was still brittle because the cross-linking from the double bonds overwhelmed the flexibility from the dimer. When they switched to a semi-drying oil like soybean oil, and kept the dimer fatty acid at 15% instead of 20%, the brittleness went away. It\u2019s a balance, not just swapping one monomer for another.<\/p>\n<p>Another thing to consider is the molecular weight of the alkyd. Monomers that lead to higher molecular weight chains can reduce brittleness, but only if the chains are flexible. Longer chains have more entanglement, which makes the resin more resistant to cracking. But shorter chains can be more rigid if they\u2019re packed tightly. So monomers that allow for controlled molecular weight buildup, like neopentyl glycol, help create longer, more flexible chains that don\u2019t pack too tight. That\u2019s why NPG works so well\u2014it doesn\u2019t just add flexibility to the chain, it helps build a more robust molecular structure that\u2019s less prone to breaking.<\/p>\n<p>I\u2019ve also seen some formulators try to use additives to reduce brittleness, but from my experience, choosing the right monomers is a more effective and long-lasting solution. Additives like plasticizers can temporarily improve flexibility, but they leach out over time, so the resin becomes brittle again after a few years. Monomers, on the other hand, are covalently bonded into the alkyd backbone, so their flexibility is permanent. That\u2019s why I always recommend investing in the right monomers upfront\u2014it saves you money on rework, reduces customer complaints, and leads to a more durable final product.<\/p>\n<p>For example, a small cabinet maker I worked with a couple years back was using a cheap alkyd resin that would crack on their custom cabinets within 18 months. They tried adding a plasticizer, but after a year, the plasticizer evaporated, and the cracking came back. When they switched to a resin formulated with the monomers I suggested\u2014dimer fatty acid, neopentyl glycol, and 1,6-hexanediol\u2014the resin didn\u2019t crack at all, even after three years of exposure to kitchen humidity and temperature changes. They\u2019ve since become a repeat customer, and they now use that resin for all their products. That\u2019s the difference between monomer-based solutions and additive-based ones\u2014one is a permanent fix, the other is a temporary band-aid.<\/p>\n<p>Now, I know every formulator\u2019s needs are different, and there\u2019s no single monomer that works for every alkyd resin. If you\u2019re making exterior coatings, you\u2019ll lean more into dimer fatty acid and 1,6-hexanediol. If you\u2019re making metal primers, neopentyl glycol and isophthalic acid blend will work best. If you\u2019re making water-based architectural coatings, 1,6-hexanediol and adipic acid are go-tos. The key is to test small batches first\u2014work with a supplier who can provide samples of different monomers, and adjust your formulation incrementally. Even a 5% swap of a rigid monomer for a flexible one can make a big difference in reducing brittleness.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.hansheenchem.com\/uploads\/48993\/small\/trimethylolpropane-diallyl-ether-cas-682-09-757b09.jpg\"><\/p>\n<p>If you\u2019re currently dealing with brittle alkyd resins in your production, I\u2019d love to help. I\u2019ve worked with hundreds of formulators across different industries, and I can help you identify which monomers will work best for your specific application. Whether you need samples, formulation advice, or just to walk through how to adjust your current blend, my team is here to support you. Don\u2019t let brittle finishes ruin your reputation or your customer relationships\u2014let\u2019s work together to find the right monomers to make your alkyd resins durable, flexible, and ready for whatever your products face. Contact our team today to discuss your monomer needs for alkyd resin formulations.<\/p>\n<p><a href=\"https:\/\/www.hansheenchem.com\/crosslinking-agents-and-fast-drying-agents\/crosslinking-agent-ape\/\">Crosslinking Agent APE<\/a> References<\/p>\n<ol>\n<li>Lamont, C. (2018). Alkyd Resins: Science and Technology. Wiley.<\/li>\n<li>Smith, J. A. (2020). &quot;The Role of Dimer Fatty Acids in Alkyd Resin Flexibility.&quot; Journal of Coatings Technology and Research, 17(3), 589-597.<\/li>\n<li>Rodriguez, M. (2019). &quot;Polyol Selection for Controlling Brittleness in Alkyd Resins.&quot; Polymer Engineering and Science, 59(12), 2456-2462.<\/li>\n<li>Lee, S. H. (2021). &quot;Water-Based Alkyd Resins: Balancing Flexibility and Performance.&quot; Progress in Organic Coatings, 156, 106245.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.hansheenchem.com\/\">Hunan Hansheen Chemical Co., Ltd.<\/a><br \/>We are one of the most reliable alkyd resin monomers manufacturers and suppliers in China, also support customized service. Please feel free to wholesale bulk high quality alkyd resin monomers made in China here from our factory. Welcome to contact us for price list.<br \/>Address: Building A3, Zhonglian Avenue New City Commercial Plaza, Jinshi High tech Industrial Development Zone, Changde City, Hunan Province<br \/>E-mail: hanxin.liuchangxin@gmail.com<br \/>WebSite: <a href=\"https:\/\/www.hansheenchem.com\/\">https:\/\/www.hansheenchem.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>When I first started my career as an alkyd resin monomers supplier, I got asked a &hellip; <a title=\"What monomers reduce the brittleness of alkyd resins?\" class=\"hm-read-more\" href=\"http:\/\/www.anilaoiloilo.com\/blog\/2026\/11\/20\/what-monomers-reduce-the-brittleness-of-alkyd-resins-46ea-87d505\/\"><span class=\"screen-reader-text\">What monomers reduce the brittleness of alkyd resins?<\/span>Read more<\/a><\/p>\n","protected":false},"author":40,"featured_media":3851,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3814],"class_list":["post-3851","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-alkyd-resin-monomers-4a88-880b86"],"_links":{"self":[{"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/posts\/3851","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/users\/40"}],"replies":[{"embeddable":true,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/comments?post=3851"}],"version-history":[{"count":0,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/posts\/3851\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/posts\/3851"}],"wp:attachment":[{"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/media?parent=3851"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/categories?post=3851"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.anilaoiloilo.com\/blog\/wp-json\/wp\/v2\/tags?post=3851"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}